AGS
AGSMatter-native grow hub for small indoor rooms
Specs

AGS hardware datasheet.

Every number on this page is what ships to the closed beta or is on the v1 bench. No placeholder ranges, no vendor marketing numbers.

Sensor accuracy quoted for SHT41 typical values at 25 C / 50 percent RH. Full temperature and humidity accuracy curves are in the Sensirion SHT41 datasheet (linked from /press).

At a glance

Four numbers that frame the rest.

MCUESP32-C6RISC-V, Wi-Fi 6, BLE 5
Sensors2 x SHT41I2C via TCA9548A mux
PWM + IR4 + 113-bit PWM, IR TX/RX 38 kHz
Matter1.3Commissioner, up to 12 plugs
Hardware
MCUEspressif ESP32-C6 (RISC-V, Wi-Fi 6, BLE 5)
Flash8 MB, dual-slot OTA with rollback, 512 KiB NVS
Sensor pair2 x Sensirion SHT41 on a TCA9548A I2C multiplexer (in-tent + outside)
Sensor accuracy+/- 0.2 degrees C, +/- 1.8 percent RH typical at 25 C / 50 percent RH
PWM outputs4 x LEDC, 13-bit resolution, 5 kHz default (up to 40 kHz), user-assigned in app
IR38 kHz RMT TX + RX (learn and replay), 8 devices x 32 commands in NVS
Mains switchingVia commissioned Matter 1.3 Wi-Fi plugs - no onboard mains relays
WirelessWi-Fi 6 (2.4 GHz), BLE 5 (provisioning), no Thread
PowerLow-voltage DC (final input spec at CE certification)
EnclosurePublished at rev 0.2 production hardware milestone
Software, control, security
FirmwareESP-IDF 5.x, C/C++, custom AGS + AIS components
MatterMatter 1.3 commissioner (esp-matter release/v1.5), up to 12 outlets per hub
ProtocolsMosquitto MQTT over TLS 1.3, HTTPS OTA, DCL attestation
CloudAGS-hosted on independent EU infrastructure (not AWS/GCP/Azure)
AppFlutter (Android, iOS, desktop) with the same API
SecurityProof-of-possession pairing, signed OTA, per-device MQTT credentials
Telemetry rate1 Hz from each SHT41, 10-sample rolling average for PID
Data residencyEU. Hosted by AGS. No third-party cloud in the control path.
Honest caveats

What is still moving before v1.

Pre-launch

Hardware locked, enclosure still evolving

The MCU, sensor pair, PWM topology, IR path, and Matter commissioner are locked. Final enclosure, input voltage, and certification stamps ship with rev 0.2 production hardware.

Automation

Sensor-triggered IR is in development

IR today is 'learn and fire' - manual from the app or on a time schedule. Firing AC in response to a VPD band is planned and listed on the roadmap. It will not be claimed as shipping until the firmware path is in release.

Certification

CE marking in progress

Pre-launch units ship as pre-certification engineering samples. CE EMC, LVD, and RED are being prepared for the v1 production run.

Warranty

12 months on v1

Pre-launch and paid beta units carry a 6-month hardware warranty; v1 production units carry 12 months. Full terms publish at launch.

Next

Numbers look right? Get on the beta list.

One email, no newsletter. We take 25 EU growers for the closed beta in 2026.